Cryotuff Boots

Taskpro Boots

A highly durable S5 safety boot that combines excellent user comfort with low temperature performance.

Chemical Protection
Chemical Protection: EN 13832-3:2006 approval for footwear highly resistant to chemicals.
S5 Category Safety Boot
S5 Category Safety Boot: Complies with the requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region, resistance to fuel oil, penetration resistance and a cleated out-sole.
Slip Resistant SRC
Slip Resistant SRC: Tested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
Vulcanised Rubber Sole
Vulcanised Rubber Sole Description
Energy Absorbing Heel
Energy Absorbing Heel: Provides a minimum of 20J cushioning at the heel, reducing the risk of fatigue and injury to joints and spine. Boot Marking: E
Toecap and Mid-Sole
Toecap and Mid-sole: Epoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant mid-sole fitted with penetration resistance greater than or equal to 1100N. Boot Marking: P
Fuel Oil Resistant
Fuel and Oil Resistant: The outer sole is resistant to oil, ensuring the working life of the boot won’t be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
Cold Insulation
Cold Insulation: The thermal insulation properties of the boot ensure that the temperature decrease inside a boot at 23°C when placed in a cold chamber at -17°C is less than 10°C after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
Hot Contact
Hot Contact: The sole has been tested for contact with a hot metal surface at 300°C for 60 seconds. Boot Marking: HRO
Antistatic
Antistatic: The electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.

Available in:

Request a Quote Request a Wear Trial

Compare

Product Features

Chemically resistant boot certified to EN 13832-3:2018 (footwear protecting against chemicals)
Antistatic - Electrical resistance meets the requirements of EN ISO 20345:2011 A (0.1MΩ to 1,000MΩ)
Integral 200 Joule epoxy coated steel toecap and stainless steel penetration resistant mid-sole
Heat resistant sole EN 20345:2012 HRO, 60 seconds at 300°C
Cold insulation to EN ISO 20345:2012 CI
Optional thermal liner
Fuel and oil resistant sole
Vulcanized rubber sole for improved slip resistance - 30% better than a conventional safety boot sole
Durable, cut-resistant vulcanised rubber sole, significantly extends working life, even in harsh terrain
Cleated outsole for maximum grip in wet and oily conditions (SRC)
Energy absorbing tunnel system in heel to EN 20345:2011 E
Superb low temperature flexibility down to -40°C
Blown midsole reduces weight and increases cushioning, significantly reducing wearer fatigue and risk of injury to joints and spine
Ergonomic cushioned insole (removable & machine washable) for greater wearer comfort
Seamless construction
Kick-off lug
Adjustable height
Knitted nylon lining
CE marked on the shaft with date and year of manufacture
REACH Compliant
Resistant to concrete and lime
Machine washable at up to 40°C
Shelf life of over 10 years

CRYOTUFF Permeation Data

Swipe to view data

Cryotuff

Chemical	CAS Number	Breakthrough times
acetic acid, glacial	64-19-7	>480mins
acetone	67-64-1	>30mins
acetonitrile	75-05-8	>60mins
ammonia gas	7664-41-7	>480mins
carbon disulphide	75-15-0	>60mins
chlorine gas	7782-50-5	>480mins
dichlorobenzene	95-50-1	>420mins
dichloromethane	75-09-2	>60mins
diethylamine	109-89-7	>120mins
dimethyl formamide	68-12-2	>60mins
ethanol	64-17-5	>480mins
ethyl acetate	141-78-6	>120mins
hexane	110-54-3	>180mins
hydrogen chloride gas	7647-01-0	>480mins
lactic acid	50-21-5	>480mins
methanol	67-56-1	>240mins
oleic acid	112-80-1	>420mins
phosphoric acid	7664-38-2	>480mins
potassium hydroxide 40%	1310-58-3	>480mins
sodium hydroxide 40%	1310-73-2	>480mins
sodium hypochlorite 16%	7681-52-9	>480mins
sulphuric acid 96%	7664-93-9	>480mins
tetrachloroethylene	127-18-4	>120mins

Certification

Chemical Protective Footwear

EN 13832-3: 2018 K,Q,R

Safety Footwear

EN ISO 20345:2011 S5 HRO CI SRC CR FO

Personal Protective Equipment

PPE Regulation (EU) 2016/425

Care

Machine washable at up to 40℃

Shelf life of over 10 years

Sizing

Commodity Code: 6402911000

UK	3	4	5	6	7	8	9	10	11	12	13	14	15
EU	35	36	37	39	41	42	43	44	45	46	47	49	50
US	4	5	6	7	8	9	10	11	12	13	14	15	16

Workmaster™ boots are generously sized as they are designed to accommodate wearers with thicker socks or a thermal lining. We recommend downloading the A3 Size Guide below to ensure the perfect fit.

DOWNLOAD A3 SIZE GUIDE