Farmlite+ Boots

• Chemical Protection
  Chemical Protection: EN 13832-3:2006 approval for footwear highly resistant to chemicals.
• SB Category Safety Boot
  SB Category Safety Boot Description
• O4 Category Occupational Footwear
  O4 Category Occupational Footwear Description
• Slip Resistant SRC
  Slip Resistant SRC: Tested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
• Vulcanised Rubber Sole
  Vulcanised Rubber Sole Description
• Energy Absorbing Heel
  Energy Absorbing Heel: Provides a minimum of 20J cushioning at the heel, reducing the risk of fatigue and injury to joints and spine. Boot Marking: E
• Toecap and Mid-Sole
  Toecap and Mid-sole: Epoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant mid-sole fitted with penetration resistance greater than or equal to 1100N. Boot Marking: P
• Toecap
  Toecap: Epoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression.
• Fuel Oil Resistant
  Fuel and Oil Resistant: The outer sole is resistant to oil, ensuring the working life of the boot won’t be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
• Cold Insulation
  Cold Insulation: The thermal insulation properties of the boot ensure that the temperature decrease inside a boot at 23°C when placed in a cold chamber at -17°C is less than 10°C after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
• Hot Contact
  Hot Contact: The sole has been tested for contact with a hot metal surface at 300°C for 60 seconds. Boot Marking: HRO

Available in:

Request a Quote Request a Wear Trial