Solestar Boots

Digger S5 Boots

An S5 safety boot designed specifically to resist cutting and wear of the sole through repetitive use with spades and forks. The Digger boot features an integral steel toe cap and midsole together with a vulcanized rubber sole for superior slip resistance.

S5 Category Safety Boot
S5 Category Safety Boot: Complies with the requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region, resistance to fuel oil, penetration resistance and a cleated out-sole.
Slip Resistant SRC
Slip Resistant SRC: Tested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
Energy Absorbing Heel
Energy Absorbing Heel: Provides a minimum of 20J cushioning at the heel, reducing the risk of fatigue and injury to joints and spine. Boot Marking: E
Toecap and Mid-Sole
Toecap and Mid-sole: Epoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant mid-sole fitted with penetration resistance greater than or equal to 1100N. Boot Marking: P
Fuel Oil Resistant
Fuel and Oil Resistant: The outer sole is resistant to oil, ensuring the working life of the boot won’t be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
Cold Insulation
Cold Insulation: The thermal insulation properties of the boot ensure that the temperature decrease inside a boot at 23°C when placed in a cold chamber at -17°C is less than 10°C after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
Hot Contact
Hot Contact: The sole has been tested for contact with a hot metal surface at 300°C for 60 seconds. Boot Marking: HRO
Antistatic
Antistatic: The electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
Ladder Grip
Additional cleats added to the instep of the footwear to improve grip on the rungs of a ladder. Boot Marking: LG (2024 Standard)

Available in:

Request a Quote Request a Wear Trial

Compare

Product Features

Integral 200 Joule epoxy coated steel toecap and stainless steel penetration resistant mid-sole
Heat resistant sole EN 20345:2011 HRO, 60 seconds at 300°C
Cold insulation to EN ISO 20345:2011 CI
Optional thermal liner
Fuel and oil resistant sole
Vulcanized rubber sole for improved slip resistance - 30% better than a conventional safety boot sole
Durable, cut-resistant vulcanised rubber sole, significantly extends working life, even in harsh terrain
Cleated outsole for maximum grip in wet and oily conditions (SRC)
Energy absorbing tunnel system in heel to EN 20345:2011 E
Seamless construction
Kick-off lug
Adjustable height
Knitted nylon lining
CE marked on the shaft with date and year of manufacture
REACH Compliant
Machine washable at up to 40°C
Shelf life of over 10 years

Certification

Safety Footwear

EN ISO 20345 S5 HRO SRC CI FO

Personal Protective Equipment

PPE Regulation (EU) 2016/425

Care

Machine washable at up to 40℃

Shelf life of over 10 years

Sizing

Commodity Code: 6402911000

UK	3	4	5	6	7	8	9	10	11	12	13	14	15
EU	35	36	37	39	41	42	43	44	45	46	47	49	50
US	4	5	6	7	8	9	10	11	12	13	14	15	16

Workmaster™ boots are generously sized as they are designed to accommodate wearers with thicker socks or a thermal lining. We recommend downloading the A3 Size Guide below to ensure the perfect fit.

DOWNLOAD A3 SIZE GUIDE