Solestar ESD

The Solestar ESD is a high performance Electro-Static Discharge safety boot; conforming to the latest European standards it incorporates a steel toecap and midsole together with an oil resistant non-marking sole and is available in sizes 3 to 15 (UK). 

  • ESD properties meet the requirements of EN 61340-5
  • Electrical resistance meets the requirements of EN ISO 20345:2011 A for antistatic 
  • Cleated, non-clogging outsole for maximum grip 
  • Oil resistant, non marking Nitrile/Polyflex compound
  • Slip resistance to EN 13287 SRA and SATRA TM144 standards
  • AntistaticAntistaticThe electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
  • Electro Static DischargeElectro Static DischargeThis boot is suitable for use in EPA areas conforming to EN 61340-5
  • Energy Absorbing HeelEnergy Absorbing HeelProvides a minimum of 20J cushioning at the heel, reducing the risk of fatigue or injury. Boot Marking: E
  • S5 Category Safety BootS5 Category Safety BootComplies with the basic requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region, resistance to fuel oil penetration resistance and a cleated out-sole.
  • Slip Resistant SRASlip Resistant SRATested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS). The test measures forward slip on the heel and with the boot flat to the floor. Boot Marking: SRA
  • Toecap & MidsoleToecap & MidsoleEpoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant midsole fitted with penetration resistance greater than or equal to 1100N Boot Marking: P



  • Machine washable at up to 40℃
  • Shelf life of over 10 years


  • Safety Footwear EN ISO 20345 S5 CI SRA FO
  • Personal Protective Equipment PPE DIR 89/686/EEC