Digger Boot S5

Designed to resist cutting and wear of the sole through repetitive use with spades and forks, the Digger boot features an integral steel toe cap and midsole together with a vulcanized rubber sole for superior slip resistance. 

  • Greater cut resistance than conventional soles - lasts between two and four times longer than PVC boots when digging
  • Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Two to three times the wear resistance of conventional soles
  • Slip resistance performance twice that required by SATRA TM144 standards
  • AntistaticAntistaticThe electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
  • Cold InsulationCold InsulationThe thermal insulation properties of the boot ensure that the temperature decrease of a boot at 23oC when placed in a cold chamber at -17oC is less than 10oC after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
  • Energy Absorbing HeelEnergy Absorbing HeelProvides a minimum of 20J cushioning at the heel, reducing the risk of fatigue or injury. Boot Marking: E
  • Fuel Oil ResistantFuel Oil ResistantThe outer sole is resistant to oil, ensuring the working life of the boot wont be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
  • Hot ContactHot ContactThe sole has been tested for contact with a hot metal surface at 300'C for 60 seconds. Boot Marking: HRO
  • S5 Category Safety BootS5 Category Safety BootComplies with the basic requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region, resistance to fuel oil penetration resistance and a cleated out-sole.
  • Slip Resistant SRCSlip Resistant SRCTested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
  • Toecap & MidsoleToecap & MidsoleEpoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant midsole fitted with penetration resistance greater than or equal to 1100N Boot Marking: P

product-data-sheet.pngce-certificate.pnguser-instructions.png

Care:

  • Machine washable at up to 40℃
  • Shelf life of over 10 years

Options:

  • Comfort insole
  • S5 Anti-Static version

Certification:

  • Safety FootwearE N ISO 20345S5 HRO SRC CI FO
  • Personal Protective Equipment PPE DIR 89/686/EEC