Maxi Chemical Overboots
A chemically protective anti-static overboot with a vulcanized rubber sole for superior slip resistance.
- Ingenious rear entry design ensures the boot is quick and easy to fit and remove
- Ideal for personnel who have to continually enter and exit hazardous/contaminated areas
- Green chemically resistant compound shaft certified to EN 13832
- Conforms to EN 943-1 (Chemical protective clothing)
- Meets the requirements of NFPA 1991 (Chemical Vapour protection)
- Resistant to Chemical Warfare agents and decontamination solutions
- Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
- Slip resistance performance twice that required by SATRA TM144 standards
AntistaticThe electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
Chemical ProtectionEN 13832-3:2006 Approval for footwear highly resistant to chemicals.
Fuel Oil ResistantThe outer sole is resistant to oil, ensuring the working life of the boot wont be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
Hot ContactThe sole has been tested for contact with a hot metal surface at 300'C for 60 seconds. Boot Marking: HRO
O4 Category Occupational BootComplies with the basic requirements for occupational footwear in EN ISO 20347:2012
Slip Resistant SRCTested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
