Hazmax™ YS

A chemically protective anti-static safety boot with an integral steel toe cap and penetration resistant midsole.
Boot Shaft

• Green Hazmax chemically resistant compound shaft certified to EN 13832-3
• Conforms to EN 943-1 (Chemical protective clothing) and certified to this standard as part of an appropriate Respirex gas tight suit
• Meets the requirements of NFPA 1991 (Chemical Vapour protection)
• 200 Joule Epoxy coated Steel toe cap to EN ISO 20345
• Seamless construction
• Knitted nylon lining
• CE marked on the shaft with date and year of manufacture
• REACH Compliant
• Slip resistance performance to EN 13287 SRA and SATRA TM144 standards
• Cleated outsole for maximum grip
• Stainless steel, penetration resistant mid-sole to EN ISO 20345 S5
• Fuel and oil resistant to EN ISO 20345 FO
• Energy absorbing tunnel system conforms to EN ISO 20345 E
• Cold insulation to EN ISO 20345 CI

• AntistaticThe electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
• Chemical ProtectionEN 13832-3:2006 Approval for footwear highly resistant to chemicals.
• Cold InsulationThe thermal insulation properties of the boot ensure that the temperature decrease of a boot at 23oC when placed in a cold chamber at -17oC is less than 10oC after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
• Energy Absorbing HeelProvides a minimum of 20J cushioning at the heel, reducing the risk of fatigue or injury. Boot Marking: E
• Fuel Oil ResistantThe outer sole is resistant to oil, ensuring the working life of the boot wont be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
• S5 Category Safety BootComplies with the basic requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region, resistance to fuel oil penetration resistance and a cleated out-sole.
• Slip Resistant SRATested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS). The test measures forward slip on the heel and with the boot flat to the floor. Boot Marking: SRA
• Toecap & MidsoleEpoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant midsole fitted with penetration resistance greater than or equal to 1100N Boot Marking: P