Foodmax LV

Designed for abattoir use the Foodmax LV combines all the features of the standard Foodmax boot with electrical protection to prEN 50321-1:2017 Class 0 to protect workers in areas where electrical stunning equipment is used.

  • White chemically resistant compound shaft
  • Superb low temperature flexibility down to -40°C
  • Cold insulation to EN ISO 20345
  • Cut resistant shaft to EN388 Class 4 (requirement 2.5)
  • Excellent resistance to oil and animal fats
  • Vulcanised rubber sole for maximum grip - 30% better than a converntional safety boot sole
  • Slip resistance performance twice that required by SATRA TM144 standards
  • Two or three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Suitable for live working at up to 1kV with every boot tested to 5kV
  • AntistaticAntistaticThe electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
  • Chemical ProtectionChemical ProtectionEN 13832-3:2006 Approval for footwear highly resistant to chemicals.
  • Cold InsulationCold InsulationThe thermal insulation properties of the boot ensure that the temperature decrease of a boot at 23oC when placed in a cold chamber at -17oC is less than 10oC after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
  • Cut ResistantCut ResistantBoot Marking: CR
  • Energy Absorbing HeelEnergy Absorbing HeelProvides a minimum of 20J cushioning at the heel, reducing the risk of fatigue or injury. Boot Marking: E
  • Fuel Oil ResistantFuel Oil ResistantThe outer sole is resistant to oil, ensuring the working life of the boot wont be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
  • High VoltageHigh VoltageDielectric boots that comply with the EN50321 standard for electrically insulating footwear.
  • Hot ContactHot ContactThe sole has been tested for contact with a hot metal surface at 300'C for 60 seconds. Boot Marking: HRO
  • S4 Category Safety BootS4 Category Safety BootComplies with the basic requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region and resistance to fuel oil.
  • Slip Resistant SRCSlip Resistant SRCTested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
  • ToecapToecapEpoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression.



  • EN 13832 pt 3, Chemical Protective Footwear
  • EN 50321 Class 0, Electrically Insulating Footwear
  • EN ISO 20345:2001 SB CI FO HRO SRC CR E, Safety Footwear
  • PPE DIR 89/686/EEC, Personal Protective Equipment


  • Machine washable at up to 40℃
  • Shelf life of over 10 years