Tasklite+

Cryolite and the Environment

A new exceptionally lightweight boot for construction and general industrial use; designed using our Cryolite compound for wearer comfort, superior grip and low temperature performance.

  • 30% lighter than conventional boots of the same size
  • Vulcanised rubber sole for improved grip 
  • Durable cut-resistant rubber sole extends working life in harsh terrain
  • Resistant to concrete and lime 
  • Superb low temperature flexibility down to -40ºC
  • Cold insulation to EN ISO 20345
  • Oil and fuel resistant sole
  • Heat resistant out-sole
  • Environmentally friendly PVC and halogen free construction
  • Comfort insole (removable and machine washable
  • AntistaticAntistaticThe electrical resistance of the boot falls between 100 kΩ and 1000 MΩ ensuring that any build up of static charge by the wearer will be conducted safely to earth.
  • Energy Absorbing HeelEnergy Absorbing HeelProvides a minimum of 20J cushioning at the heel, reducing the risk of fatigue or injury. Boot Marking: E
  • Fuel Oil ResistantFuel Oil ResistantThe outer sole is resistant to oil, ensuring the working life of the boot wont be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
  • Hot ContactHot ContactThe sole has been tested for contact with a hot metal surface at 300'C for 60 seconds. Boot Marking: HRO
  • S5 Category Safety BootS5 Category Safety BootComplies with the basic requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region, resistance to fuel oil penetration resistance and a cleated out-sole.
  • Slip Resistant SRCSlip Resistant SRCTested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
  • Toecap & MidsoleToecap & MidsoleEpoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression. Stainless steel penetration resistant midsole fitted with penetration resistance greater than or equal to 1100N Boot Marking: P