Foodlite +

Cryolite and the Environment

A new exceptionally lightweight food industry safety boot designed for wearer comfort and low temperature flexibility. The Foodlite S4 incorporates a vulcanised rubber sole for greater slip resistance and durability and its environmentally freindly construtcion is halogen free and biodegradable.

  • 30% Lighter than conventional boots of the same size
  • Combines cold insulation to EN ISO 20345 with superb low temperature flexibility down to -40℃
  • Optional thermal liner 
  • Comfort insole (removable and machine washable)
  • Grey vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
  • Slip resistance performance twice that required by SATRA TM144 standards
  • Two to three times the wear resistance of conventional soles
  • Fuel and oil resistant
  • Greater cut resistance than conventional soles
  • Upper available in White or Blue

 Aslo available as an O4 soft toe boot

  • Cold InsulationCold InsulationThe thermal insulation properties of the boot ensure that the temperature decrease of a boot at 23oC when placed in a cold chamber at -17oC is less than 10oC after 30 minutes when measured at the upper surface of the insole. Boot Marking: CI
  • Energy Absorbing HeelEnergy Absorbing HeelProvides a minimum of 20J cushioning at the heel, reducing the risk of fatigue or injury. Boot Marking: E
  • Fuel Oil ResistantFuel Oil ResistantThe outer sole is resistant to oil, ensuring the working life of the boot wont be compromised if used in oily environments. The test involves immersion in oil for 22 hours after which the sole is checked for excessive swelling, shrinkage or increased hardness. Boot Marking: FO
  • Hot ContactHot ContactThe sole has been tested for contact with a hot metal surface at 300'C for 60 seconds. Boot Marking: HRO
  • S4 Category Safety BootS4 Category Safety BootComplies with the basic requirements for safety footwear in EN ISO 20345:2011 and additionally includes a closed set region, antistatic properties energy absorption of seat region and resistance to fuel oil.
  • Slip Resistant SRCSlip Resistant SRCTested and approved for resistance to slip on a ceramic tile floor coated with a dilute soap solution of sodium lauryl sulphate (NaLS) [SRA] and Slip resistance on steel floor with glycerol [SRB]. The tests measure forward slip on the heel and with the boot flat to the floor. Boot Marking: SRC
  • ToecapToecapEpoxy coated steel toecap fitted tested for 200J impact resistance and 15kN compression.



  • Machine washable at up to 40℃
  • Shelf life of over 10 years


  • Personal Protective Equipment PPE DIR 89/686/EEC
  • Safety Footwear EN ISO 20345:2011 SB CI HRO FO SRC E


  • Occupational Footwear EN ISO 20347:2012 OB CI HRO FO SRC E