For the power generation and distribution sector we recommend the use of Dielectric boots wherever there is a risk of electric shock from high voltages. Without the the correct PPE a high voltage electric current can stop the heart or produce fatal burns. For this reason, every single pair of Workmaster™ Dielectric Boots undergoes a high voltage test before it leaves the factory.
Dielectric boots are used for working on live power, or in the area of live power, as current can jump large distances - especially in wet or damp conditions. Even when high voltage equipment has been switched off, there may be a residual charge on the equipment which could cause an injury. They are suitable for live working on high voltage installations such as sub-stations, overhead line clearing, excavating or moling close to live cables, electric/hybrid vehicles and electric railways & transportation.
Designed for abattoir use the Foodmax LV protects workers in areas where electrical stunning equipment is used.
A Class 2 electrically insulating dielectric boot providing protection at up to 20kV.
An electrically insulating dielectric overboot providing high voltage protection of up to 20kV
An electrically insulating dielectric overboot approved to current European standards. The Respirex dielectric boot provides protection of up to 30kV over the complete boot for over three minutes.
A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap.
A front opening electrically insulating dielectric overboot
A Class 0 electrically insulating dielectric boot with an integral steel toe cap and Nitrile/PVC sole.
Designed for abattoir use the Foodmax LV protects workers in areas where electrical stunning equipment is used.
An electrically insulating dielectric overboot providing high voltage protection of up to 20kV
An electrically insulating dielectric overboot approved to current European standards. The Respirex dielectric boot provides protection of up to 30kV over the complete boot for over three minutes.
A front opening electrically insulating dielectric overboot